#set document(title: "17.3 Testing Distributions Demo", author: "OpenStax") #set page(width: 8.5in, height: auto, margin: 1in) #import "@preview/cetz:0.5.2" #set text(font: ("STIX Two Text", "Libertinus Serif", "New Computer Modern"), size: 10.5pt, lang: "en") #show math.equation: set text(font: ("STIX Two Math", "New Computer Modern Math")) #set par(justify: true, leading: 0.62em, spacing: 0.9em) #set enum(spacing: 1.1em) // room between list items so tall inline fractions don't collide #set list(spacing: 1.1em) #set table(stroke: 0.5pt + rgb("#c7ccd3")) #let BLUE = rgb("#183B6F") // brand navy — section bars + example/solution labels (white on navy 11.09:1) #let ORANGE = rgb("#A94509") // brand primary-700 — AA-safe deep orange for TEXT (5.93:1 on white; raw brand #F37021 is 2.94:1 and must never carry text) #let RED = rgb("#DC2626") // brand error-600 #let GREEN = rgb("#059669") // brand success-600 (decoration only; small green text uses green-text #007942) #show heading.where(level: 1): it => block(width: 100%, above: 0pt, below: 16pt, fill: gradient.linear(BLUE, rgb("#2C5AA0")), inset: (x: 14pt, y: 12pt), radius: 3pt, text(fill: white, weight: "bold", size: 19pt, it.body)) #show heading.where(level: 2): it => block(width: 100%, above: 18pt, below: 10pt, fill: BLUE, inset: (x: 10pt, y: 6pt), radius: 2pt, text(fill: white, weight: "bold", size: 12pt, it.body)) #show heading.where(level: 3): it => text(fill: ORANGE, weight: "bold", size: 12.5pt, it.body) #show heading.where(level: 4): it => text(fill: BLUE, weight: "bold", size: 10.5pt, it.body) #let examplebox(label, title, body) = block(width: 100%, breakable: true, fill: rgb("#EFF1F5"), stroke: 0.5pt + rgb("#CFDDF0"), radius: 4pt, inset: 10pt, above: 12pt, below: 12pt)[ #block(below: 6pt)[#box(fill: BLUE, inset: (x: 6pt, y: 2pt), radius: 2pt, text(fill: white, weight: "bold", size: 8.5pt, label)) #h(0.4em) #strong[#title]] #body] // rail = decorative left rule (raw brand token); labelcolor = AA-safe label text shade #let notebox(label, rail, labelcolor, tint, body) = block(width: 100%, breakable: true, fill: tint, stroke: (left: 3pt + rail), inset: (left: 10pt, rest: 8pt), radius: (right: 4pt), above: 11pt, below: 11pt)[ #text(fill: labelcolor, weight: "bold", size: 7.5pt, tracking: 0.5pt)[#upper(label)] #linebreak() #body] #let solutionbox(body) = block(above: 4pt, below: 8pt)[ #text(fill: BLUE, weight: "bold", size: 8.5pt)[Solution] #linebreak() #body] #let figph(msg) = block(width: 100%, height: 60pt, fill: rgb("#f6f7f9"), stroke: (paint: rgb("#c7ccd3"), dash: "dashed"), radius: 4pt, inset: 10pt)[ #align(center + horizon, text(fill: rgb("#889"), style: "italic", size: 9pt, msg))] // Standardize inlined figure sizes: measure the natural CeTZ canvas, then scale to a // consistent envelope (aspect-aware; see build_typst.py FIG_* constants). Unlike the // print preamble, dimensions are FLOORED: in an editor a user can trim a figure to a // degenerate 1-D shape (a bare line), and w/h or tw/w would then divide by zero. #let _STD_W = 3.5 #let _WIDE_W = 5.6 #let _MAX_H = 3.4 #let _ASPECT_WIDE = 2.2 #let _UPSCALE_MAX = 1.15 #let stdfig(body) = context { let m = measure(body) let w = calc.max(m.width / 1in, 0.01) let h = calc.max(m.height / 1in, 0.01) let tw = if w / h > _ASPECT_WIDE { _WIDE_W } else { _STD_W } let s = calc.min(tw / w, _MAX_H / h, _UPSCALE_MAX) align(center, box(scale(x: s * 100%, y: s * 100%, reflow: true, body))) } #show figure: set block(breakable: false) #set figure(gap: 8pt) #show figure.caption: set text(size: 8.5pt, fill: rgb("#555")) == 17.3#h(0.6em)Testing Distributions Demo This section is an interactive demonstration. The live simulation runs on the original site: #link("https://onlinestatbook.com/2/chi_square/theor_sim.html")[open the demonstration at onlinestatbook.com]. Learning Objectives + Develop a basic understanding of the properties of a sampling distribution based on the properties of the population. #strong[Instructions] #linebreak() In this simulation, 100 numbers are either sampled from a normal distribution or a uniform distribution. The frequencies in each of 10 "bins" is then displayed in the "observed" column. The expected frequencies based on both a normal distribution (on the left) or a uniform distribution (on the right) are shown just to the left of the observed frequencies. For each bin the value (E-O)2/E is computed where E is the expected frequency and O is the observed frequency. The sum of these quantities is the value of Chi Square shown at the bottom. #linebreak() #linebreak() 1. The default is to sample from a normal distribution. Click the sample button and 100 values will be sampled from a normal distribution. Compare the observed values in the "From a Normal Distribution" section to the expected values. Is the Chi Square test significant at the 0.05 level? How often would you expect it to be significant. #linebreak() 2. Compare the observed frequencies from the "From a Uniform Distribution" section to the expected frequencies. In what way are they different? Is the difference significant? If so, then the null hypothesis that the numbers were sampled from a uniform distribution could be rejected. Of course, in this simulation, you know where the numbers were sampled so you know the null hypothesis is false. #linebreak() 3. Simulate several experiments and see if the significance for the test of a uniform distribution is always significant. #linebreak() 4. Make the actual distribution a uniform distribution and do more simulated experiments. Compare the results to when the actual distribution was normal. #strong[Illustrated Instructions] #linebreak() This simulation samples 100 values from a normal or uniform distribution and calulates the the Chi Square value. As can be seen from the image below, the simulation begins by displaying a table with expected frequencies. Clicking on the "Sample" button, samples 100 values from a normal distribution (by default) and displays the observed frequencies as well as the results of the Chi Square tests. You can sample from either a normal or uniform distribution.