#set document(title: "3.3 Measures of Central Tendency", author: "OpenStax") #set page(width: 8.5in, height: auto, margin: 1in) #import "@preview/cetz:0.5.2" #set text(font: ("STIX Two Text", "Libertinus Serif", "New Computer Modern"), size: 10.5pt, lang: "en") #show math.equation: set text(font: ("STIX Two Math", "New Computer Modern Math")) #set par(justify: true, leading: 0.62em, spacing: 0.9em) #set enum(spacing: 1.1em) // room between list items so tall inline fractions don't collide #set list(spacing: 1.1em) #set table(stroke: 0.5pt + rgb("#c7ccd3")) #let BLUE = rgb("#183B6F") // brand navy — section bars + example/solution labels (white on navy 11.09:1) #let ORANGE = rgb("#A94509") // brand primary-700 — AA-safe deep orange for TEXT (5.93:1 on white; raw brand #F37021 is 2.94:1 and must never carry text) #let RED = rgb("#DC2626") // brand error-600 #let GREEN = rgb("#059669") // brand success-600 (decoration only; small green text uses green-text #007942) #show heading.where(level: 1): it => block(width: 100%, above: 0pt, below: 16pt, fill: gradient.linear(BLUE, rgb("#2C5AA0")), inset: (x: 14pt, y: 12pt), radius: 3pt, text(fill: white, weight: "bold", size: 19pt, it.body)) #show heading.where(level: 2): it => block(width: 100%, above: 18pt, below: 10pt, fill: BLUE, inset: (x: 10pt, y: 6pt), radius: 2pt, text(fill: white, weight: "bold", size: 12pt, it.body)) #show heading.where(level: 3): it => text(fill: ORANGE, weight: "bold", size: 12.5pt, it.body) #show heading.where(level: 4): it => text(fill: BLUE, weight: "bold", size: 10.5pt, it.body) #let examplebox(label, title, body) = block(width: 100%, breakable: true, fill: rgb("#EFF1F5"), stroke: 0.5pt + rgb("#CFDDF0"), radius: 4pt, inset: 10pt, above: 12pt, below: 12pt)[ #block(below: 6pt)[#box(fill: BLUE, inset: (x: 6pt, y: 2pt), radius: 2pt, text(fill: white, weight: "bold", size: 8.5pt, label)) #h(0.4em) #strong[#title]] #body] // rail = decorative left rule (raw brand token); labelcolor = AA-safe label text shade #let notebox(label, rail, labelcolor, tint, body) = block(width: 100%, breakable: true, fill: tint, stroke: (left: 3pt + rail), inset: (left: 10pt, rest: 8pt), radius: (right: 4pt), above: 11pt, below: 11pt)[ #text(fill: labelcolor, weight: "bold", size: 7.5pt, tracking: 0.5pt)[#upper(label)] #linebreak() #body] #let solutionbox(body) = block(above: 4pt, below: 8pt)[ #text(fill: BLUE, weight: "bold", size: 8.5pt)[Solution] #linebreak() #body] #let figph(msg) = block(width: 100%, height: 60pt, fill: rgb("#f6f7f9"), stroke: (paint: rgb("#c7ccd3"), dash: "dashed"), radius: 4pt, inset: 10pt)[ #align(center + horizon, text(fill: rgb("#889"), style: "italic", size: 9pt, msg))] // Standardize inlined figure sizes: measure the natural CeTZ canvas, then scale to a // consistent envelope (aspect-aware; see build_typst.py FIG_* constants). Unlike the // print preamble, dimensions are FLOORED: in an editor a user can trim a figure to a // degenerate 1-D shape (a bare line), and w/h or tw/w would then divide by zero. #let _STD_W = 3.5 #let _WIDE_W = 5.6 #let _MAX_H = 3.4 #let _ASPECT_WIDE = 2.2 #let _UPSCALE_MAX = 1.15 #let stdfig(body) = context { let m = measure(body) let w = calc.max(m.width / 1in, 0.01) let h = calc.max(m.height / 1in, 0.01) let tw = if w / h > _ASPECT_WIDE { _WIDE_W } else { _STD_W } let s = calc.min(tw / w, _MAX_H / h, _UPSCALE_MAX) align(center, box(scale(x: s * 100%, y: s * 100%, reflow: true, body))) } #show figure: set block(breakable: false) #set figure(gap: 8pt) #show figure.caption: set text(size: 8.5pt, fill: rgb("#555")) == 3.3#h(0.6em)Measures of Central Tendency #notebox("Note", rgb("#8a94a6"), rgb("#556666"), rgb("#f7f8fa"))[ #emph[Prerequisites] Percentiles, Distributions, Central Tendency #linebreak() #linebreak() ] #notebox("Note", rgb("#8a94a6"), rgb("#556666"), rgb("#f7f8fa"))[ #emph[Learning Objectives] + Compute mean + Compute median + Compute mode ] In the previous section we saw that there are several ways to define central tendency. This section defines the three most common measures of central tendency: the mean, the median, and the mode. The relationships among these measures of central tendency and the definitions given in the previous section will probably not be obvious to you. Rather than just tell you these relationships, we will allow you to discover them in the simulations in the sections that follow. This section gives only the basic definitions of the mean, median and mode. A further discussion of the relative merits and proper applications of these statistics is presented in a later section. === Arithmetic Mean The arithmetic mean is the most common measure of central tendency. It is simply the sum of the numbers divided by the number of numbers. The symbol "μ" is used for the mean of a population. The symbol "M" is used for the mean of a sample. The formula for μ is shown below: μ = ΣX/N #linebreak() where ΣX is the sum of all the numbers in the population and #linebreak() N is the number of numbers in the population. #linebreak() #linebreak() The formula for M is essentially identical: M = ΣX/N #linebreak() where ΣX is the sum of all the numbers in the sample and #linebreak() N is the number of numbers in the sample. As an example, the mean of the numbers 1, 2, 3, 6, 8 is 20/5 = 4 regardless of whether the numbers constitute the entire population or just a sample from the population. Table 1 shows the number of touchdown (TD) passes thrown by each of the 31 teams in the National Football League in the 2000 season. The mean number of touchdown passes thrown is 20.4516 as shown below. μ = ΣX/N #linebreak()   = 634/31 #linebreak()   = 20.4516 #linebreak() Table 1. Number of touchdown passes. #figure(table( columns: 1, align: left, inset: 6pt, [37 33 33 32 29 28 28 23 22 22 22 21 21 21 20 20 19 19 18 18 18 18 16 15 14 14 14 12 12 9 6], )) Although the arithmetic mean is not the only "mean" (there is also a geometric mean), it is by far the most commonly used. Therefore, if the term "mean" is used without specifying whether it is the arithmetic mean, the geometric mean, or some other mean, it is assumed to refer to the arithmetic mean. === Median The #strong[median] is also a frequently used measure of central tendency. The median is the midpoint of a distribution: the same number of scores is above the median as below it. For the data in Table 1, there are 31 scores. The 16th highest score (which equals 20) is the median because there are 15 scores below the 16th score and 15 scores above the 16th score. The median can also be thought of as the 50th percentile. ==== Computation of the Median When there is an odd number of numbers, the median is simply the middle number. For example, the median of 2, 4, and 7 is 4. When there is an even number of numbers, the median is the mean of the two middle numbers. Thus, the median of the numbers 2, 4, 7, 12 is (4+7)/2 = 5.5. When there are numbers with the same values, then the formula for the third definition of the 50th percentile should be used. === Mode The mode is the most frequently occurring value. For the data in Table 1, the mode is 18 since more teams (4) had 18 touchdown passes than any other number of touchdown passes. With continuous data such as response time measured to many decimals, the frequency of each value is one since no two scores will be exactly the same (see discussion of continuous variables). Therefore the mode of continuous data is normally computed from a grouped frequency distribution. Table 2 shows a grouped frequency distribution for the target response time data. Since the interval with the highest frequency is 600-700, the mode is the middle of that interval (650). Table 2. Grouped frequency distribution. #figure(table( columns: 2, align: left, inset: 6pt, table.header([Range], [Frequency]), [500-600 #linebreak() 600-700 #linebreak() 700-800 #linebreak() 800-900 #linebreak() 900-1000 #linebreak() 1000-1100], [3 #linebreak() 6 #linebreak() 5 #linebreak() 5 #linebreak() 0 #linebreak() 1], ))