#set document(title: "1.6 Variables", author: "OpenStax") #set page(width: 8.5in, height: auto, margin: 1in) #import "@preview/cetz:0.5.2" #set text(font: ("STIX Two Text", "Libertinus Serif", "New Computer Modern"), size: 10.5pt, lang: "en") #show math.equation: set text(font: ("STIX Two Math", "New Computer Modern Math")) #set par(justify: true, leading: 0.62em, spacing: 0.9em) #set enum(spacing: 1.1em) // room between list items so tall inline fractions don't collide #set list(spacing: 1.1em) #set table(stroke: 0.5pt + rgb("#c7ccd3")) #let BLUE = rgb("#183B6F") // brand navy — section bars + example/solution labels (white on navy 11.09:1) #let ORANGE = rgb("#A94509") // brand primary-700 — AA-safe deep orange for TEXT (5.93:1 on white; raw brand #F37021 is 2.94:1 and must never carry text) #let RED = rgb("#DC2626") // brand error-600 #let GREEN = rgb("#059669") // brand success-600 (decoration only; small green text uses green-text #007942) #show heading.where(level: 1): it => block(width: 100%, above: 0pt, below: 16pt, fill: gradient.linear(BLUE, rgb("#2C5AA0")), inset: (x: 14pt, y: 12pt), radius: 3pt, text(fill: white, weight: "bold", size: 19pt, it.body)) #show heading.where(level: 2): it => block(width: 100%, above: 18pt, below: 10pt, fill: BLUE, inset: (x: 10pt, y: 6pt), radius: 2pt, text(fill: white, weight: "bold", size: 12pt, it.body)) #show heading.where(level: 3): it => text(fill: ORANGE, weight: "bold", size: 12.5pt, it.body) #show heading.where(level: 4): it => text(fill: BLUE, weight: "bold", size: 10.5pt, it.body) #let examplebox(label, title, body) = block(width: 100%, breakable: true, fill: rgb("#EFF1F5"), stroke: 0.5pt + rgb("#CFDDF0"), radius: 4pt, inset: 10pt, above: 12pt, below: 12pt)[ #block(below: 6pt)[#box(fill: BLUE, inset: (x: 6pt, y: 2pt), radius: 2pt, text(fill: white, weight: "bold", size: 8.5pt, label)) #h(0.4em) #strong[#title]] #body] // rail = decorative left rule (raw brand token); labelcolor = AA-safe label text shade #let notebox(label, rail, labelcolor, tint, body) = block(width: 100%, breakable: true, fill: tint, stroke: (left: 3pt + rail), inset: (left: 10pt, rest: 8pt), radius: (right: 4pt), above: 11pt, below: 11pt)[ #text(fill: labelcolor, weight: "bold", size: 7.5pt, tracking: 0.5pt)[#upper(label)] #linebreak() #body] #let solutionbox(body) = block(above: 4pt, below: 8pt)[ #text(fill: BLUE, weight: "bold", size: 8.5pt)[Solution] #linebreak() #body] #let figph(msg) = block(width: 100%, height: 60pt, fill: rgb("#f6f7f9"), stroke: (paint: rgb("#c7ccd3"), dash: "dashed"), radius: 4pt, inset: 10pt)[ #align(center + horizon, text(fill: rgb("#889"), style: "italic", size: 9pt, msg))] // Standardize inlined figure sizes: measure the natural CeTZ canvas, then scale to a // consistent envelope (aspect-aware; see build_typst.py FIG_* constants). Unlike the // print preamble, dimensions are FLOORED: in an editor a user can trim a figure to a // degenerate 1-D shape (a bare line), and w/h or tw/w would then divide by zero. #let _STD_W = 3.5 #let _WIDE_W = 5.6 #let _MAX_H = 3.4 #let _ASPECT_WIDE = 2.2 #let _UPSCALE_MAX = 1.15 #let stdfig(body) = context { let m = measure(body) let w = calc.max(m.width / 1in, 0.01) let h = calc.max(m.height / 1in, 0.01) let tw = if w / h > _ASPECT_WIDE { _WIDE_W } else { _STD_W } let s = calc.min(tw / w, _MAX_H / h, _UPSCALE_MAX) align(center, box(scale(x: s * 100%, y: s * 100%, reflow: true, body))) } #show figure: set block(breakable: false) #set figure(gap: 8pt) #show figure.caption: set text(size: 8.5pt, fill: rgb("#555")) == 1.6#h(0.6em)Variables #notebox("Note", rgb("#8a94a6"), rgb("#556666"), rgb("#f7f8fa"))[ #emph[Prerequisites] none #linebreak() #linebreak() ] #notebox("Note", rgb("#8a94a6"), rgb("#556666"), rgb("#f7f8fa"))[ #emph[Learning Objectives] + Define and distinguish between independent and dependent variables + Define and distinguish between discrete and continuous variables + Define and distinguish between qualitative and quantitative variables ] === Independent and dependent variables Variables are properties or characteristics of some event, object, or person that can take on different values or amounts (as opposed to constants such as π that do not vary). When conducting research, experimenters often manipulate variables. For example, an experimenter might compare the effectiveness of four types of antidepressants. In this case, the variable is "type of antidepressant." When a variable is manipulated by an experimenter, it is called an independent variable. The experiment seeks to determine the effect of the independent variable on relief from depression. In this example, relief from depression is called a dependent variable. In general, the independent variable is manipulated by the experimenter and its effects on the dependent variable are measured. Example \#1: Can blueberries slow down aging? A study indicates that antioxidants found in blueberries may slow down the process of aging. In this study, 19-month-old rats (equivalent to 60-year-old humans) were fed either their standard diet or a diet supplemented by either blueberry, strawberry, or spinach powder. After eight weeks, the rats were given memory and motor skills tests. Although all supplemented rats showed improvement, those supplemented with blueberry powder showed the most notable improvement. #linebreak() 1. What is the independent variable? (dietary supplement: none, blueberry, strawberry, and spinach) #linebreak() 2. What are the dependent variables? (memory test and motor skills test) #linebreak() #linebreak() #link("http://www.apa.org/monitor/dec01/blueberries.html")[More information on the blueberry study] Example \#2: Does beta-carotene protect against cancer? Beta-carotene supplements have been thought to protect against cancer. However, a study published in the #emph[Journal of the National Cancer Institute] suggests this is false. The study was conducted with 39,000 women aged 45 and up. These women were randomly assigned to receive a beta-carotene supplement or a placebo, and their health was studied over their lifetime. Cancer rates for women taking the beta-carotene supplement did not differ systematically from the cancer rates of those women taking the placebo. #linebreak() #linebreak() 1. What is the independent variable? (supplements: beta-carotene or placebo) #linebreak() 2. What is the dependent variable? (occurrence of cancer) #linebreak() Example \#3: How bright is right? An automobile manufacturer wants to know how bright brake lights should be in order to minimize the time required for the driver of a following car to realize that the car in front is stopping and to hit the brakes. #linebreak() #linebreak() 1. What is the independent variable? (brightness of brake lights) #linebreak() 2. What is the dependent variable? (time to hit brakes) ==== Levels of an Independent Variable If an experiment compares an experimental treatment with a control treatment, then the independent variable (type of treatment) has two levels: experimental and control. If an experiment were comparing five types of diets, then the independent variable (type of diet) would have 5 levels. In general, the number of levels of an independent variable is the number of experimental conditions. === Qualitative and Quantitative Variables An important distinction between variables is between qualitative variables and quantitative variables. Qualitative variables are those that express a qualitative attribute such as hair color, eye color, religion, favorite movie, gender, and so on. The values of a qualitative variable do not imply a numerical ordering. Values of the variable “religion” differ qualitatively; no ordering of religions is implied. Qualitative variables are sometimes referred to as #strong[categorical variables.] Quantitative variables are those variables that are measured in terms of numbers. Some examples of quantitative variables are height, weight, and shoe size. In the study on the effect of diet discussed above, the independent variable was type of supplement: none, strawberry, blueberry, and spinach. The variable "type of supplement" is a qualitative variable; there is nothing quantitative about it. In contrast, the dependent variable "memory test" is a quantitative variable since memory performance was measured on a quantitative scale (number correct). #linebreak() === Discrete and Continuous Variables Variables such as number of children in a household are called discrete variables since the possible scores are discrete points on the scale. For example, a household could have three children or six children, but not 4.53 children. Other variables such as "time to respond to a question" are continuous variables since the scale is continuous and not made up of discrete steps. The response time could be 1.64 seconds, or it could be 1.64237123922121 seconds. Of course, the practicalities of measurement preclude most measured variables from being truly continuous.